1, a 2 laser light, AC adapter, a 3 manual 1 4, SD Card 1
1, in strict accordance with procedures described in the instruction
manual operation, do not disassemble lamps.
2, the product is only suitable for indoor use, and to ensure that water,
moisture, shock, do not use in dusty environments.
3, based on semiconductor laser characteristics, the working environment
required temperature 15 ~ 30 ℃, continuous two hours later, take off
lights for 10 minutes, the laser will cool down completely.
4, to prevent foreign matter into the body, so as not to cause trouble.
5, do not frequent at the beginning, so as not to affect the life of the
laser light and to avoid prolonged open.
6, to avoid the observation of laser equipment used afar, this may
increase the risk.
7, once again transport, please note that earthquake, it is best to use
the original packaging.
1, the laser light risk rating for the CIass lllA, to observe directly in
the beam is dangerous.
2, the lamp on the power requirements of 100-240V-50-60Hz, if out of this
range, it is recommended to use voltage regulator device, otherwise it
will seriously affect the laser life.
The products in the factory has been comprehensive and rigorous testing,
the user should strictly comply with the above stated warnings and
operating instructions, due to misuse of any product damage caused is not
within the scope of our warranty, which led to the neglect of manual
failures and problems are not within the scope of the dealer responsible
for any action on the human body generated by the laser damage, the
Power: AC adapter input AC100-240V/50-60Hz, output +15 V 1000mA/15V 500mA
Laser - Wavelength: 532nm (green), 660 nm (red), 405nm (violet)
Product Weight: 1.28KG/PC
SD Laser Control System
1, the system only supports the FAT32 file system, the use of the new SD
card, first formatted as FAT32.
2, the system only supports short file name, file name (including the
folder name) of up to 8-bit file name and 3 extension, file name and
extension of letters, file name can not exceed 8 bits, can not have
Chinese characters, or files system does not recognize.
3, SD Card special card to be dedicated, (containing Program.rar files,
this software is trial version, to be recognized in the state of
anti-virus software to use.)
4, create a folder, you need to create a folder under the file folder with
the same name of the PRG file and put the folder the file you want to play
all the editing to the PRG file, then play the edited speed "Key seek"
mode, the playback speed, for example, in the AA folder, create a AA.prg
5, the program list: Users can use a text editor (Notepad) to edit the
program list, and its extension should be changed to. PRG. Program list
file name from the play, playback speed, playback frequency components, in
the middle, "separated. each line item to edit a program. For example, a
program by the abl. ild, ab2. ild, ab3. ild three files, abl, ild playback
speed is 15K, repeat play 3 times, ab2. ild playback speed is 20K, 1
player times, ab3. ild playback speed is 18K, 4 plays, then (program list.
Contents are as follows:
abl. ild, 15,3
ab2.. ild, 20,1
ab3. ild, 18,4
6, the system supports a file format standard ILD, ILD is a file
LCD display mode state and operations:
◆ program Table: Play list mode
◆ Key Seek: keyboard selection mode
◆ Audio Mode: voice-activated mode
◆ Auto Mode: Automatic mode
◆ System Set:: System Settings
◆ Floder Select: working folder
1 Turn the power switch plug in SD card, touch LCD MODE button to display
the second line "Program Table" (playlist mode) press the ENTER key
(confirmation) Play SD card automatically at this time the internal
pattern. For the next feature to switch back to the main menu, tap the
2, Tap MODE button for the second line of LCD displays "Key Seek"
(keyboard selection mode) Press ENTER key (confirmation) key then press
the UP or DOWN key to turn up and down play the selected pattern.
3, Tap MODE button for the second line of LCD displays "Audio Mode" (Voice
Mode) Press ENTER key (confirmation) this time into the voice state (IC
stored within the player designs) for the next function touch switch MODE
button to return to the main menu.
4, tap the MODE button for the LCD display the second line "Auto Mode"
(automatic mode) then press ENTER key (confirmation) this time into the
player automatically stored within the IC design, for the next feature to
switch back to tap the MODE button to the main menu.
5, Tap MODE button for the second line of LCD displays "System Set:"
(System Settings) Press ENTER key (confirmation) into the "Colr Mode Set"
(color settings) Press ENTER key (confirmation) UP key and DOWN keys,
respectively, Select color, color, three colors. Press the ENTER key
(confirmation) by UP or DOWN button to select "Audio Set" (voice
sensitivity setting) press ENTER key (confirmation) key and press the UP
DOWN keys to set the sensitivity, press the ENTER key (confirmation), by
UP key and DOWN key Select "Phasic Set" (phase-setting) press ENTER key
(confirmation) key and press the UP DOWN keys to select the XY-or X + Y
press the ENTER key (confirmation).
6, tap the MODE button for the LCD display the second line "Floder Select"
(SD card inside a folder selection) Press ENTER key (confirmation) into
the folder list, press the UP key or DOWN button to select a folder, press
the ENTER key press ( confirmed) then it is broadcast on the selected