Mini Laser Stage Lighting User Manual
Thank you for using our laser products.For the purpose of safety and better operation of this projector,please read this manual carefully before using it.
2:AC Power supply--1piece
1,Please according the User Manual to operate the projector.
2,This unit is intended for indoor use only and should be prevented from water,moisture and shake.
3,The working temperature of this unit is 15-30 centigrade degree,and it must be powered off after continuously working 2hours to let the lasers cool down.
4,To keep the body of this unit clean to avoid any unnecessary troubles.
5,Do not turn on and off it frequently and try to avoid making it worked for a long time.
6,Do not use the telescope to watch the laser rays,otherwise will be largen the dangers.
7,You had better use the original package during the transportation.
1,The grade of the laser for it is Class B,and will be dangerous if exposure to the eyes directly.
2,The working voltage is 110-240V,50-60HZ,once exceeded this range its lifetime will be shorten.
All the projectors are examined strictly before shippment,in that case the user should operate it according to the User Manual strictly.We and the distributor will not be resposible for any mistakes cause by the wrong operations.
1,Power:AC power supply Input AC 110-240V,50-60HZ,output 5.0V,1.5A.
2,Laser generator:Green:wavelength 532nm,power 50mW,
Red:wavelength 650nm,power 100mW.
How it works:
When the power is connected, the green & red laser will start to make the star effects and will turn around(speed is ajustable): Red+green 30seconds-red laser 30secs-green 30secs, then red 30sec-red+green 30sec...
The laser will be jumping shining according to the beat of the music